Overhead Crane Pre-Use Inspection CompanyThis field is for validation purposes and should be left unchanged.Operator Initials(Required)Shift(Required) First Shift Second Shift Crane ID(Required)Department(Required)Select Dept.Walther MfgEngineeringContractorDocumentation & Authorization Operator has valid training/certification Crane inspection records are up to date Load charts are posted and legible Select AllGeneral Condition Crane appears free of damage, corrosion, or structural deformities Runway and travel path are clear of obstructions Bumpers, stops, and rails are intact and secure Guards and covers are in place Select AllControls & Safety Devices All control buttons and levers are labeled and functioning properly Emergency stop works correctly Limit switches (upper/lower, travel, trolley) are operational Warning devices (horn, light, bell) function correctly Safety interlocks engage properly Select AllHooks & Attachments Hook is free of cracks, bends, or excessive wear Hook latch present and operating properly Swivel operates smoothly Hook throat opening is within allowable limits Select AllWire Rope / Chains No broken strands, kinks, birdcaging, or excessive wear Properly reeved and seated in drums, sheaves, and pulleys Adequate lubrication applied End connections secured and intact Select AllHoist, Trolley & Bridge Hoist raises and lowers smoothly without unusual sounds Trolley moves freely along the beam Bridge travels smoothly the full length of runway Brakes function correctly (hold and stop) Select AllLoad Test (Without Load First) Controls respond correctly in all directions Limit switches stop motion as intended Brakes engage properly Select AllWith Test Load (Before Full Use) Hoist holds the load without drifting No unusual noises, jerks, or vibrations All safety devices remain operational Select AllIs there any: New Damage, Maintenance, or Repair Needed?(Required) Yes No Describe any Damage, Maintenance, Repair, or Replacement Needed(Required)
