Compressed Gas Pre-Use Inspection X/TwitterThis field is for validation purposes and should be left unchanged.Operator:(Required) First Last Department(Required)Walther MfgUmarex USAEngineeringFacilitiesR&DOtherGas Type(Required)Visual Inspection ( Tic box if item passes inspection)(Required) Cylinders are clearly labeled with gas contents Labels are legible and not damaged or missing Cylinders are free from dents, corrosion, gouges, or leaks Hydrostatic test dates are current Valve protection caps are in place when not in use Select All*If a cylinder appears unsafe, it must not be used. *Cylinders showing signs of damage, fire exposure, or leakage be removed from service immediately *Employees must not attempt to repair cylinders or valves.Storage ( Tic box if item passes inspection)(Required) Cylinders stored upright Cylinders secured with chains, straps, or racks Full and empty cylinders stored separately and labeled Oxygen cylinders stored at least 20 ft from fuel gas cylinders OR separated by a compliant fire barrier Cylinders stored away from heat sources, ignition sources, and direct sunlight Storage area is dry, well-ventilated, and free of combustible materials Select All*If a cylinder appears unsafe, it must not be used. *Cylinders showing signs of damage, fire exposure, or leakage be removed from service immediately *Employees must not attempt to repair cylinders or valves.Use & Operation ( Tic box if item passes inspection)(Required) Correct regulator used for the specific gas Regulators, hoses, and fittings are in good condition Valves opened slowly while standing to the side Cylinder valves closed when not in use Select All*If a cylinder appears unsafe, it must not be used. *Cylinders showing signs of damage, fire exposure, or leakage be removed from service immediately *Employees must not attempt to repair cylinders or valves.Notes:List any failed inspection items, deficiencies, or unsafe conditions observed during this inspection.
